Skip to main content

Posts

Showing posts with the label LS Retail

Installing LS Central - POS on local machine

Introduction: In this blog, I'm attempting to capture the LS Central - POS installation process on Local Machine. This blog has nothing to do LS Central - Server Setup for POS. LS Retail / LS Central - On Premise POS Pre- requisites : LS Central Installed on Server SSL Setup on LS Server (https://www.olisterr.tech/2020/03/how-to-setup-navuserpassword-with-ssl.html) LS - POS Installer Business Central - On Premise Installer Demonstration: Once your LS Retail / LS Central POS is setup on the main server. Just prior to Go-Live, you will actually have to install this POS on multiple systems and connect these POS to the main server with LS Retail / LS Central. 0.Preparation: Prior to actually installing Business Central On-Premise Windows Client, you need to make sure that you're able to ping the target with the correct Port number. For this I made use of PS-Ping tool.  PSPing - IP Address: Port If you're unable to PS-Ping the correct IP with Port number, simply check the Advan

Resolving The tenant 'default' is not accessible error or Regenerating new symbols for Business Central On-Premise for customised Database

Problem Statement: Disclaimer:  This blog is only applicable for Business Central On-Premise Version. If you are stuck in the same issue, try this at your own risk.  I had installed  Business Central v14 (Spring 2019) On-Premise with LS Retail . In this, Business Central comes with a ready made setup to connect with VS Code. As I restored the DB given by LS Retail, I could no longer connect to VS Code. This could be a potential case of  Running C/SIDE and AL Side-by-side  or customising on top of LS Retail. Despite all the configurations being correct in project's app.json and launch.json, I could no longer connect to Business Central, I  couldn't download any Symbols  and I  couldn't publish any Extension  to Business Central.   App.json and Launch.json I checked all BC Administration setup for Development and it seemed to be perfectly fine. I had  Enabled Development Endpoint ,   Development Endpoint Port was 7049 ,  Target was set to Internal ,  Ena